Dimar 707N-125-10 - 125mm Dia, Carbide Tipped, Grooving Cutter with Chip Limitation, 3/8" Cutting Height, 6 Teeth O-Flute Straight Min sanding height: 1/4″

Min sanding height: 1/4″

and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig

The parallelism between the sanding drums and the conveyor table is easily adjusted by turning adjustment screws

If you decide to conceal or decoratively accent your pocket holes with our solid wood pocket hole plugs

Due to the large HP motor (25 HP) the machine is capable of dimensioning even wide boards

Dimar 707N-125-10 - 125mm Dia, Carbide Tipped, Grooving Cutter with Chip Limitation, 3/8" Cutting Height, 6 Teeth O-Flute Straight Min sanding height: 1/4″Ships in 2 3 Weeks This ultimate grooving cutter has a hard wearing steel tool body with six tungsten carbide knives. Ideal to produce precise grooves and slots on materials. Carbide Tipped for cutting grooves along the grain Especially suitable for producing grooves and slots in softwood, hardwood, and man made boards (with or without coating) on a spindle molder Can be used with spacer rings for comb jointing Hard wearing steel tool body complete