RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 86mm vendor_MG_CHEMICALS Highest sensitivity and safe high-voltage

Highest sensitivity and safe high-voltage measurements at the same time

Profiled rubber strip with black filler for table board or intermediary trays

Single shielded test lead type for each channel is used for all measurement including DSO and digital multimeter functions

Bottom Depth: 11

Air requirement: 243

RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 86mm vendor_MG_CHEMICALS Highest sensitivity and safe high-voltageOverview The fine toothing is particularly suitable for cutting metals. It ensures smoother running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non alloyed steels (up to 1. 000 N mm strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non ferrous and light metals. The RUKO bi metal hole