Metcal DFP Desoldering Tip Standard Length (∅xL) 1.27x5.42mm DFP-CN5 vendor_HAKKO Stakeless testing uses two clamps

Stakeless testing uses two clamps to perform earth ground loop resistance measurementa without stakes

Inner diameter: 2 in

Heavy Duty Equipment

For use with electric or pneumatic impact wrenches with a 3/8" drive

It's used for soldering at narrow pitches

Metcal DFP Desoldering Tip Standard Length (∅xL) 1.27x5.42mm DFP-CN5 vendor_HAKKO Stakeless testing uses two clampsOverview DxP Desolder Tips are the standard desoldering tip range for the Metcal desolder series MFR 1150, MFR 1350, MFR 1351 and MFR UK5. The second letter in the part number designates the temperature series. The temperature series DFP are nominally 390 C. Metcal recommends the DFP series for most applications. The Temperature series DCP are nominally 450 C and are recommended for high temperature and thermally demanding applications. Can be used