Metcal Bevel (STTC) (Bevel/L) 30° x 1.78mm (L) 11.7mm 500 Series STTC-505 vendor_HK_PORTER precision milled from USA steel

precision milled from USA steel

is more than 150 hours Automatic shut-down Meter automatically shuts down after 15 minutes of inactivity Safety and Environmental Specifications General safety IEC 61010-1: Pollution Degree 2 Measurement safety IEC 61010-2-032: CAT III 600 V / CAT IV 300 V Operating temperature -10 °C to +50 °C Storage temperature -40 °C to +60 °C Operating humidity Non-condensing (<10 °C) 90% relative humidity (10 °C to 30 °C) 75% relative humidity (30 °C to 40 °C) 45% relative humidity (40 °C to 50 °C) Protection class IEC 60529: IP30 (jaw closed) Operating altitude 2000 m Storage altitude 12000 m Current sensor action category IEC 61557-13: Class 1

PZ TYPE cabinet pattern screwdrivers

Do not freeze

Waters circles or part circles up to a radius of approximately 14m

Metcal Bevel (STTC) (Bevel/L) 30° x 1.78mm (L) 11.7mm 500 Series STTC-505 vendor_HK_PORTER precision milled from USA steelOverview STTC , SMTC Solder Tip Cartridges are the standard soldering tip range for the Metcal MX 500, MX 5200 and MX 5200 series soldering systems. All cartridges are available in 3 temperature ranges, 600 series nominally 330 C, 700 series nominally 390 C and 800 series nominally 450 C. The temperature series is designated by the first digit following the dash in the part number. e. g. 600 series is STTC SMTC 0xxx, 700 series is STTC SMTC 1xxx and