120mm x 3/4", 2x12T, FTG, Split Style, Tungsten Carbide Sliding Table Saw Scoring Blade, 52812001-34 upcut-saws Other saws require over 25

Other saws require over 25 turns to raise or lower the blade with the Jobsite Saw

Tenso P-14

The CTS is not able to support the use of Dado blades

turn to Castle

Feed speed for fly cut should be at least 1200ipm (30m/min) which should create a very light fuzzed surface which is desirable for part holding

120mm x 3/4", 2x12T, FTG, Split Style, Tungsten Carbide Sliding Table Saw Scoring Blade, 52812001-34 upcut-saws Other saws require over 25120mm x 3 4", 2x12 Teeth, Flat Top, Tungsten Carbide Split Scoring Saw Blade, 52812001 34 with 2 5 34 Pinholes. Tooth Style: Flat Top Pin Holes: 2 5 34 Application Pre Scoring Material Plastic Laminated Sheets Machine Types Table Saws Sliding Table Saws Panel Sizing Saws with controllable pre scoring units Technical Data Blade Type: Scoring Saw BladesDiameter: 120mm (4. 72")Bore: 3 4" (19mm)Pin Holes: 2 5 34Tooth Configuration: Flat TopTeeth: