Fluke t3000 FC Wireless Temperature Kit not_toolgroup and RF mode turned off

and RF mode turned off Frequency range 40 Hz to 1 kHz Ingress protection IEC/EN 60529: IP30 with jaw closed LCD Digital reading 9999 counts Refresh rate 4 per second Operating temperature -10 °C to + 50 °C Storage temperature -20 °C to + 60 °C Operating humidity Non condensing (<10 °C) (< 50 °F) ≤90% RH (at 10 °C to 30 °C [50 °F to 86 °F]) ≤75% RH (at 30 °C to 40 °C [86 °F to 104 °F]) ≤45% RH (at 40 °C to 50 °C [104 °F to 122 °F]) (Non condensing) Operating altitude 2000 m (6561 feet) Storage altitude 12 000 m (39

For an optimal decoupling from ground

A set of six blades in the most commonly used sizes

Good absorbency

10 mV/mA Accuracy Same as V dc

Fluke t3000 FC Wireless Temperature Kit not_toolgroup and RF mode turned offOverview The Fluke FC Wireless t3000 Temperature Kit is part of the Fluke Connect team of wireless test tools Connect the t3000 FC Wireless Temperature Module to your test point, and view the results up to 20 meters away on the 3000 FC Wireless Digital Multimeter. Youll save time, with less run around collecting multiple measurements. Use multiple modules for measurements on three phase systems, as a stand alone measurement tool or combine with other