BT004 - 16Amp 4 Channel Relay Module hub-plattformen but the switch has a

but the switch has a learning mode that allows you to change the threshold and the activation direction

Maximum output power at 6 V: 1

Note that you will need to cut the trace that connects the enable line to Vcc on the PCB if you want to be able to disable the sensor

Short range

Der Erfassungsbereich dieser Version liegt bei etwa 10 cm bis 80 cm (4

BT004 - 16Amp 4 Channel Relay Module hub-plattformen but the switch has aThe BT004 Bluetooth Relay provides four dry contact relay outputs with a current rating of up to 16 amps, each controlled via an HC06 Bluetooth serial port. The module is powered by a 12 V supply, which can be regulated or unregulated. The DC input jack is a 2. 1 mm female jack with positive core polarity. The DC supply must deliver at least 500 mA at 12 V DC. The relays are SPCO (Single Pole Change Over) types. The NO, NC, and common pins are all