Watts LFM115 THD E 30-300 TC 1 1/2 - Part of the LFM115 Series ZA100F-8NH a fixed 12¾″ × 12¾″

a fixed 12¾″ × 12¾″ square top with a heel-proof ductile-iron grate

Specifications Body Material Bronze Brand Watts EAN 098268558395 GPM-When Relieved Does Not Apply to Product Inlet Connection Size 1 IN Inlet Connection Type Female Threaded Inlet Thread Type NPTF Lead Free NO Maximum Temperature-Fahrenheit 210 Maximum Working Pressure-PSI 75 Outlet Connection Size 1 IN Outlet Connection Type Female Threaded Outlet Thread Type NPTF Part Number F315155 Pressure Range Does Not Apply To Product Pressure Relief Setting-PSI 100 Protection Type Temperature And Pressure Series N240 Shank Length Does Not Apply To Product Temperature Relief-Fahrenheit 210 Thermostat Material Stainless Steel Thermostat Probe Length 9 IN Specification Sheet - 40

6 BAR at 38 degree C Seat Material Lead Free Brass Series LF601 WOG Rating 400 PSI Specification Sheet - 601

Specifications Actuation No Assembled Dry No Balance Stop Plate No Ball Material 304 Stainless Steel Body Finish Cast Iron Body Material Cast Iron Brand Watts Buy American Act Compliant NO Class Rating 125 Control Type Lever Handle CV Rating 330 EAN 098268908831 Electrical Rating Does Not Apply To Product Inlet Connection Size 2 IN Inlet Connection Size-Metric 50 MM Inlet Connection Type Flanged Joint Inlet Thread Type Does Not Apply To Product Lead Free NO Maximum Temperature-Fahrenheit 353 Minimum Temperature - Celsius -18

Gasket seal between body and top assembly to prevent leaks in multi-level structures

Watts LFM115 THD E 30-300 TC 1 1/2 - Part of the LFM115 Series ZA100F-8NH a fixed 12¾″ × 12¾″This 1 1 2 inch ACV is armed with ArmorTek, a patented 3 part advanced epoxy coating system designed to limit both microbial induced (MIC) and exposed metal substrate corrosion. This pressure reducing control valve is designed to automatically reduce a fluctuating higher inlet pressure to a constant lower downstream pressure regardless of varying flow rates. The quick closing action of the valve limits the possibility of damaging high inlet pressure